Juicing is a great way to consume fresh and healthy fruits and vegetables, but cleaning the juicer parts is a bit of a hassle. Cleaning your juicer after each use is essential to prevent bacteria growth and ensure its continuous functions. This article will guide you on how to clean your juicer parts, remove stains, and clear the top cover using simple and effective solutions.
Step-by-Step Instructions for Cleaning Juicer Parts:
Table of Contents,
To clean your juicer parts, you will need the following ingredients:
- Dish soap or a mild detergent
- Warm water
- White vinegar or lemon juice
- Baking soda
- Soft-bristled brush or sponge
- Microfiber towel or cloth
Warning: [Be sure to check your particular juicer’s instruction manual for specific cleaning instructions and any parts that are not dishwasher safe for your blender model.]
Disassemble your juicer:
Before cleaning, make sure to unplug your juicer and take apart all removable parts, including the blade, strainer, pulp container, and juice container.
Rinse with warm soapy water:
Use warm water to rinse all parts and remove leftover pulp or debris. Fill your sink or a large bowl with warm water and add a few drops of dish soap or mild detergent. Soak the juicer parts for a few minutes to loosen any remaining residue.
Scrub with a soft-bristled brush or sponge:
Use a soft-bristled brush or sponge to scrub away any remaining pulp or stains. Be gentle with the parts to avoid damaging them. Rinse the parts thoroughly with running water to remove all soap and debris.
Disinfect with vinegar or lemon juice:
Fill a small bowl with equal parts white vinegar or lemon juice and water. Soak the parts in the solution for a few minutes to disinfect and remove any odours.
Scrub with baking soda:
Mix baking soda with water to form a paste for any stubborn stains or residue. Apply the paste to the affected area and scrub gently with a soft-bristled brush or sponge.
Rinse and dry:
Rinse the parts thoroughly with water and dry them with a microfiber towel or cloth. Make sure all parts are completely dry before reassembling your juicer.
How to Clean the Inside of a Juicer?
Cleaning the inside of the juicer is essential to prevent mineral buildup and bacteria growth. Here’s how to do it:
- Fill the juicer’s container with warm water and add a few drops of dish soap.
- Then, turn on the juicer and let it run for a few minutes to allow the soapy water to circulate throughout the machine.
- Once the juicer has run for a few minutes, disassemble it, and rinse each part with water.
- Dry the parts: Wipe each piece with a clean towel or leave them to air dry.
How to Clean Minerals Out of a Juicer:
Minerals from fruits and vegetables can build up in your juicer and cause clogging. Here’s how to remove them:
- Mix equal parts water and white vinegar in a bowl or sink. Soak the juicer’s removable parts in the mixture for a few hours or overnight.
- Use a soft-bristled brush to scrub the parts and remove any mineral buildup.
- Then rinse each piece thoroughly with water to remove any vinegar residue.
- Wipe each piece dry with a clean towel or leave them to air dry.
How to Clean a Juicer Sieve?
The mesh sieve can become clogged with pulp and debris, making cleaning challenging. Here is some step show of cleaning it:
- Soak the sieve in warm, soapy water for a few minutes.
- Use a soft-bristled brush to remove any pulp or debris. Be gentle to avoid damaging the mesh.
- Rinse the sieve thoroughly with water to remove any soap residue.
- Soak the sieve in water and vinegar for a few hours or overnight to remove any mineral buildup.
- Rinse the sieve thoroughly with water to remove any vinegar residue.
- Wipe the sieve dry with a clean towel or leave it to air dry.
How to Remove Stains from Your Juicer?
- Baking soda: Make a paste with equal parts baking soda and water. Apply the paste to the stained areas and let it sit for a few minutes. Use a soft-bristled brush to scrub away the stain, then rinse the part with water.
- Lemon juice: Cut a lemon in half and rub it on the stained area. Let the lemon juice sit for a few minutes, then rinse the part with water.
- Hydrogen peroxide: Mix an equal ratio of hydrogen peroxide and water in a spray bottle. Spray the solution on the stained area and let it sit for a few minutes. Use a soft-bristled brush to scrub away the stain, then rinse the part with water.
How to Clear the Top Cover of Juicer?
If your juicer has a clear top cover, it can become cloudy over time. Here’s how to clean it:
- Mix equal parts white vinegar and water in a spray bottle. Spray the solution on the top cover and let it sit for a few minutes.
- Use a microfiber cloth to wipe the top cover clean. Be gentle to avoid scratching the plastic.
- Rinse the top cover thoroughly with water to remove any vinegar residue.
- Wipe the cover with a clean towel or leave it to air dry.
Do different types of juicers available in the market have a unique method for cleaning?
Several types of juicers are available in the market today, including centrifugal juicers, masticating juicers, and citrus juicers, each with its unique design and method of operation. As a result, they may also require different cleaning methods.
Centrifugal juicers:
Centrifugal juicers have a high-speed blade that cuts fruits and vegetables into small pieces, which are then spun at high speeds to extract the juice. They may have removable blades that need extra attention during cleaning to prevent leftover pulp or debris from clogging the machine.
Masticating Juicers:
Masticating juicers use a slow and gentle squeezing action to extract juice, which means that they require more complex parts and need to be disassembled and cleaned thoroughly. Some models may have removable parts that can be cleaned in the dishwasher.
Citrus Juicers:
Citrus juicers are designed to extract juice from citrus fruits like lemons, oranges, and grapefruits. They usually have a cone-shaped reamer placed on a container to collect the juice. These juicers require a different cleaning approach, as the reamer can accumulate pulp and seeds.
Conclusion:
Cleaning your juicer after each use is essential to keep it functioning correctly and ensure your juice is fresh and healthy. Following the above simple steps, you can easily clean your juicer parts, remove stains, clear the top cover, and keep your juicer in top condition. So, give your juicer the care it deserves, and enjoy fresh, healthy juice every day.
People Also Read:
- Can You Use A Hand Mixer In A Glass Bowl?
- Can You Put Soda in a Blender? Is it Safe?
- Best Blender For Dry Ingredients –Powder Making
FAQs
To effectively clean the metal part of your juicer, you should first disassemble the parts and soak them in warm water and mild detergent solution for about 10-15 minutes. Then, use a soft brush or sponge to remove any remaining dirt or residue. Avoid using abrasive cleaners or metal brushes, which can scratch or damage metal surfaces. Rinse the parts thoroughly with clean water and dry them completely before reassembling the juicer.
One effective way to remove mineral buildup from a juicer is to use a solution of white vinegar and water. Mix equal white vinegar and water, then soak the affected parts in the solution for about 30 minutes. After soaking, use a soft brush or sponge to scrub the buildup, then rinse the parts thoroughly with clean water. Alternatively, you can use a specialized juicer cleaner or a mixture of lemon juice and baking soda to remove mineral buildup.
Yes, washing your juicer after every use is important to keep it clean and hygienic. The fruit and vegetable residues left behind in the juicer can quickly grow bacteria and cause mold, which can harm your health. To avoid this, take the time to disassemble your juicer and wash each part thoroughly with warm water and mild detergent after each use. You can also use a soft brush to scrub away any stubborn residue. It’s essential to ensure all parts are completely dry before reassembling the juicer.