This blog post may contain #ad or affiliate links. If you make a purchase through these links, I may earn a commission at no extra cost to you.

Home » Kitchen Guides » Juicer & Blenders » Why is my Nutribullet Blender so Loud?

Why is my Nutribullet Blender so Loud?

If you are a fitness enthusiast you must have a go-to kitchen appliance for making your smoothies and protein shake, and what is better than Nutribullet. But being the best in the game, you must know they can not only make simple smoothies, but they can also blend out ingredients that are not usually easy to blend. This advantage comes with a price, they have strong motors that also make a lot of noise, I also went through the same problem while using it, so I did a quick research and let me share what I found out.

Nutribullet is quite powerful, it has a built-in motor that makes it so. This motor is what makes it not only so useful but also very loud. It can easily reach 100 decibels. The motor might be the primary factor, but other factors such as blade style, etc. also influence the loudness. But we can fix that easily!

Why Blenders are so Loud?

Table of Contents,

Blenders are usually very loud because the blades are moving at a high speed, and the motor is not enclosed in a properly insulated material, but there are some fruits and veggies or maybe ice that can make the blender even louder.

Another reason why blenders are so loud is because of the amount of horsepower the blender has. The horsepower of a blender is the amount of energy it takes to run. For example, most blenders have about 2 or 3 horses so they are pretty loud because they have a lot of power.

Moreover, a blender is usually attached to something like a kitchen counter and the sound bounces off of it and creates a much louder sound. For example, in the movie theater when you hear that really loud noise and it’s coming from somewhere like below you and it’s bouncing off of something, that’s why it sounds so loud.

Why is my NutriBullet Blender so loud?

Nutribullet blender is a revolutionary product. It is used to have smoothies and other food items. It comes with a powerful motor, which can blend almost anything in a matter of seconds. It grinds the vegetables, fruits, and other ingredients to a smooth consistency. But sometimes Nutribullet blender can be extremely loud. The high decibel level of the Nutribullet blender can cause difficulty in its operational use. There are some users who have suggested that the Nutribullet blender is working but its sound is not audible.

before moving towards the solution let’s have a look at the common reasons why Nutribullet is so loud

  • Firstly, due to the powerful motor of the blender, the blade spins at high speeds. This causes a soundwave. therefore, due to the high spinning speed of blades, the blender emits a loud noise.
  • Secondly, if there is any problem with the blade then it can also cause a soundwave and thus produce a loud noise.
  • Sometimes due to the solution that you are using, it may cause a lot of noise. like if you crushing ice at maximum speed then it makes a lot of noise.

How to Make Nutribullet Quieter

There are many ways you can make your Nutribullet quieter and the first thing you can do to quiet down your blender is to put a towel underneath it, or you can also use a silicone mat, this will be comparatively quiet down your blender. While you put this underneath make sure you are not too near the walls or any corners, where the sound will be reflecting or amplifying.

If the above trick is not working for you, then buy a blender enclosure you usually see in the cafes. Blender enclosures are beneficial to use because it helps reduce the noise that is produced by blenders. By using a blender enclosure you can reduce the noise down by more than 30 decibels. This is a significant reduction in sound, which will keep the noise from being a disturbance in your kitchen.

Blender enclosures are designed with soundproofing insulation, so they are sure to absorb any sounds that your blender is making. This helps to keep the sound from irritating you and your family as well as those in other rooms.

sometimes this noise is emerging because there is too much stress on the motor, either there is no water in the blender, or you have put too big chunks of fruits or veggies in the blender. In these cases, you can try adding more water to your mixture or chopping up the vegetables and fruits a little more.

And lastly, You can replace the blades with more sharp blades, but the truth is that there is not going to be much difference in the decibels of the sound produced by the blender, it will only speed up the process by cutting it more finely and quickly.

If all the above tricks are not helping you to decrease the sound level of your blender then scroll down and see my recommendation about the quietest blender that you can have. Also, don’t forget to catch the weekly offer below.

Best Blender for Bodybuilders

Shake the Bottle, Wake the Fitness. ………………………………….. GET AMAZING DEAL OF FITNESS BLENDERS

Does Replacing The Blade Of Your Nutribullet Make It Quieter?

The simple and sweet answer is NO!

Many people believe that they can make their Nutribullet quieter by replacing the blade of their Nutribullet blender. You can replace the blades with more sharp blades, but the truth is that there is not going to be much difference in the decibels of the sound produced by the blender, it will only speed up the process by cutting it more finely and quickly.

However, you can replace the blade of your Nutribullet to make it more efficient and to avoid rusting.

How to Clean Nutribullet Motor Base

If you accidentally spill something on the motor base, turn off your Nutribullet and unplug it from the power. Remove the cup and blade from the base and then using a damp cloth or dish towel quickly wipe off the spillage. You do not need to remove any component from the Motor base, instead of cleaning around it, this will do the job. And if you want to clean deeply, you can use a brush, but never put it underwater and never ever put the motor base in the dishwasher. Make sure that the motor base is completely dry before using it again.

You also need to know how to clean your blender because when you are frequently using the Nutribullet blender, it can get dirty very quickly and it might be easy to wash it, but to properly clean it you need to follow the following instructions after the use.

  1. Once you have used your blender, power it off and unplug it from the power outlet.
  2. Now you can open your blender and remove the cap from the blades.
  3. Then rinse it quickly, because the quickly you can rinse it the less there will be chance of the food getting stuck to the vessel.
  4. Now you can use a sponge with soap to wash it properly, if you do not want to clean it by hand, you can also use warm, soapy water to wash them.

Nutribullet Bearings Replacement

If your blender has been used a lot, its bearings will also start to wear out and instead of getting new blender you can simply replace the bearings and improve the working of your blender.

  1. First you need to unscrew the blades while moving them in the opposite direction to the rubber gear at the same time, while being careful not to cut yourself.
  2. Remove the blades while keeping in check the order of all the components, as you will need to put them back, after the bearings have been replaced.
  3. Bearings are tightly fit, so you need something flat like a screw drive to get them out. Keep in mind that you might need to apply force, as they will be harder to remove as your blender gets older.
  4. You put the new bearings in place of the old ones and then you can put the rest of the components in the same order you picked the apart and them put the rubber gear and blades back in their place.
YouTube video

why is my nutribullet rusting

when you use your blender for a long time, the blades and the jars start to rust.

it happens due to several reasons. a very common reason for nutribullet rusting is the dishwasher. the dishwasher has a high pH level and the jar gets corroded overtime period. if you are not using properly filtered water, it may cause rusting. moreover, if you are not cleaning it properly or leaving the jar in water for a long time, it may cause rusting.

To get rid of this follow these possible actions

  • if the blender is in warranty you can replace the jars.
  • if not, you can use toothpaste and cover the rust spots by using a soft cloth.then wash it properly and dry it.
  • you can also use a toothbrush and soap to clean the blades thoroughly. curry powder is another option for removing rust.
  • If none of the above solutions are working for you, you can replace blades and jars.

Best Quieter Blender for Kitchen

if you want that your children don’t awake while making delicious smoothies for them, if you want to make smoothies for your loved one very quietly in the early morning without waking up other family members then I highly recommend you to have Vitamix 36019 36019-1 Vita-Mix Quiet One Blender.

Vitamix 36019 36019-1 Vita-Mix Quiet One Blender

it comes with a variety of features and is a bit expensive but worth it. It is so quiet that you will hardly hear any noise from the blender. I have tested this myself. The blades are very sharp that it will make your work easier. moreover, this is an easy-to-clean electrical appliance. You just have to add water and soap in it with the blades running, then after some time when you will switch it off. It will clean itself.

I am recommending it because I myself have used it and find this product very promising and reliable.

YouTube video

Also, Read Trending Topics

  1. What Blenders Does Starbucks Use? Is It Vitamix?
  2. Can you put frozen fruits in a Blender?
  3. Can You Put Soda in a Blender? Is it Safe?

Frequently Asked Questions

Why Is Nutribullet Leaking Brown Liquid?

If your Nutribullet is leaking brown liquid then you should know that it’s been very long since you replaced your blades and that it is time for you to replace them. This black/brown/oil gunk that comes out of the bottom can start to gather up, and it can also slow down or stop your blades, so it is advised to replace the blades every 6 months.

Why is my blender getting louder?

it happens due to various reasons
1. when you overload the blender or when the blender is poorly constructed
2. Amount of horsepower the blender is using the load being put on it by what you are blending
3. due to the blades becoming loose

Why is my nutribullet smoking?

If you are experiencing issues with your Nutribullet smoking, there may be a few reasons for this;
1. Motor is overheated
2. There is not enough water in the Nutribullet
3. The blades are not seated properly in the jar
4. The motor is overloaded
The best way to get rid of this problem is to replace the blade assembly as this will fix all of these problems and ensure no more smoking will occur.


So we have seen why your nutribullet blender becomes so loud sometimes. Moreover, we have discussed the solution to overcome the sound problem of blenders. well, I personally use a blender in an enclosure and it works well for me? what do you prefer to do? just leave a comment and I will get back to you


Hi, I’m Shelly, a chef by profession and a writer by passion. Here you will find genuine and researched-based information and reviews of all kitchen-related products. Because I have been a professional chef for many years and under my keen observation I have used all kinds of kitchen gadgets. And now, I want to share my personal experiences with the audience through this Blog. I assure you, the information provided here will make your kitchen life much easier.

Leave a Comment